Italia
Front underbody stiffening bar Renault clio 4 cradle (NO RS)
Front underbody stiffening bar Renault clio 4 cradle (NO RS)
Couldn't load pickup availability
The Track kit Cod. RNCL.04DC specially designed by LNM & tested directly on Clio 4 Dci Gtline!!!
DOES NOT FIT CLIO 4 RS MODEL
The kit is Plug&Play and includes 1 front underbody reinforcement bar.
Designed for maximum performance, with a good 1.5cm thickness to have even more rigidity on the rear train and to reduce roll when cornering at high speeds! It is fixed directly to the sled via M8 screws with 3/8 stiffening cylindrical sockets to be inserted inside the sled plus oversized washers and self-locking stainless steel nuts, tightening must be done only! by means of a torque wrench not exceeding 24 NM as per M8 specification.
Runway use.
⚠️ATTENTION⚠️
WITH LOWERED SETUP - 35MM IT MAY be too low and there is a risk of hitting bumps.
WITH NON-ORIGINAL EXHAUSTS OR EXHAUSTS THAT DO NOT FOLLOW THE ORIGINAL LINE, there could be problems during assembly.
The kit includes 1 High Strength Reinforcement Bar FOR TRACK USE + Stainless steel bolts.
This kit must be installed by a qualified technician.
TRACK USE.
Double layer powder finish RAAL 3003 + Stainless steel identification plate.
Entirely produced in Italy🇮🇹.
The staff
LNMracing racing parts.
Share


